Introduction of hydraulic drawing machine for copper:
The copper rod hydraulic drawing machine we produce adopts advanced hydraulic drive technology, which can apply a relatively uniform hydraulic pressure to the copper busbar. Therefore, our copper bus wire drawing machine can improve the dimensional accuracy and other performance of the copper busbar. The automatic drawing machine can be used for subsequent processing after extrusion, and can also be used for processing lines of various copper materials.
Features of copper rod hydraulic drawing machine:
1. Our copper rod hydraulic drawing machine adopts a hydraulic drive system, which can be more evenly stressed and effectively avoid problems such as breakage and shaking.
2. Our copper bus wire drawing machine also adopts an intelligent plc control system, which can monitor the operating parameters such as pulling force, speed, stroke, temperature, etc. In real time.
3. Our automatic drawing machine also adopts an environmentally friendly structural design, which makes the overall energy consumption low, the operating noise is small, there is no oil splash, and it can keep the production environment clean and hygienic.
Technical parameters of hydraulic drawing machine for copper:
1 | Model | YLB(I)-50-10 |
2 | Nominal drawing capacity | 50t |
3 | Effective drawing length | 10m |
4 | Nominal straightening capacity | 100ton |
5 | Effective straightening length | 5m~10m |
6 | Shapes specification | Width | Max 200mm |
Thickness | Max 15mm |
7 | Drawing speed | 3~10m/min (the speed is up to 20m/min under low pressure) |
8 | Return speed | 50m/min |
9 | Install capacity | 130kw |
10 | Compressed air | 0.8Mpa, 2m3/h |
11 | Consumption of cooling water | 40m3/h |
12 | Power supply form | Three-phase four-wire |
13 | Dimension | Length (mm) | 23500 |
Width (mm) | 5000 |
Height (mm) | 2200 |
14 | Requirements of the length of the workshop(mm) | 38000×5000 |
Uses of hydraulic drawing machine for copper:
Copper rod hydraulic drawing machine is mainly used for the drawing process of copper busbar or aluminum profile through continuous extrusion or casting. Our copper bus wire drawing machine is suitable for the finishing process of busbars, flat wires, conductive bars and some special profiles of various specifications. It is also suitable for electrical switchgear, high-voltage cable connection system, new energy photovoltaic inverter, transformer coil terminal, electric vehicle battery connection row and other precision scenes.
How to use the automatic drawing machine?
Before we officially use the hydraulic drawing machine for copper, we must first check whether the connections of each system are normal, whether the hydraulic oil, coolant and lubricating oil are filled, and whether the control panel is powered on normally. Then we select the appropriate wire drawing die and install it in the die frame according to the specifications of the copper busbar or aluminum profile to be processed by the copper bus wire drawing machine, and ensure that the center of the die is aligned. Then introduce the material to be drawn from the pay-off stand into the feeding channel of the automatic drawing machine, adjust the feeding device and the straightening wheel group to make the material in a stable and straight state. Set the drawing speed, stroke length, tension range and other parameters by operating the touch screen interface, start the automatic drawing machine for trial operation, and observe whether there is any material slippage, jamming or abnormal sound.
About us:
Dalian Konform Technology co., ltd. was founded in 1993 and is a global leading supplier of continuous extrusion technology and equipment. Dalian Konform has developed three product categories (continuous extrusion, continuous coating and continuous sheathing of copper and aluminum) and 24 different models of equipment, which are widely used in the production of AS wires, OPGW, power cable aluminum sheaths, copper flat wires, copper busbars, copper strip blanks, aluminum tubes, aluminum conductors, etc.
