Introduction of Oxygen Free Copper rod machine:
Oxygen Free Copper rod machine adopts a unique structural design and No. 1 standard cathode copper Cu-CATH-2 that meets GB/T 467-2010 standard as raw materials. It is energy-saving and environmentally friendly, and can flexibly switch a variety of copper rod specifications. Continuous casting machine on copper rod can be used by small and medium-sized cable factories, cable manufacturers, and metal product processing companies.
Features of continuous casting machine on copper rod:
1. The unit copper melting energy consumption of our upward continuous casting machine is reduced by more than 20%, and the power consumption per ton of copper is controlled below 320kwh, which greatly saves the operating cost.
2. The sensor of the continuous casting machine on copper rod has a service life of 1 year under standard conditions of use, which reduces the frequency and cost of downtime maintenance.
3. The upward continuous casting machine uses self-developed heat-resistant materials, and the heat resistance level is higher than the heat resistance level of 1300 degrees of other manufacturers, which prolongs the service life of the furnace body.
Technical parameters of Oxygen Free Copper rod machine:
Model | SYLZ-3000T |
Annual output | 3000 tons (annually uninterrupted) |
Strands quantity | 6 strands |
Pulling pitch | 1-5mm adjustable |
Pulling speed | 0.3~3.2 m/min |
Take-up machine | 3 sets |
Rod diameter | Φ8-20 (customize) |
Inductor furnace style | combined style joint furnace |
Type of drive | servo motor drive |
Take-up type | computer automatic control |
Coil weight | more than 3 tons |
Continuous casting machine | PLC controlled, touch screen |
Running capacity | 180KW |
Installation capacity | 300KVA |
Every ton of molten copper capacity | 320KWH |
Application scenarios of upward continuous casting machine:
Our upward continuous casting machine can be used in the fields of power, cable, wire, hardware manufacturing and copper-based processing. The oxygen-free copper rods produced by the oxygen free copper rod machine in the wire and cable industry have excellent conductivity and ductility. In the metal processing industry, the oxygen-free copper rods produced by the continuous casting machine on copper rod can also be used to manufacture intermediate materials such as copper tubes, copper strips, copper bars, and copper rods.
How to use upward continuous casting machine?
Before using oxygen free copper rod machine, you need to clean the cathode copper that meets gb/t 467-2010, cut it into suitable specifications and put it into the melting furnace. Then turn on the computer control system of the continuous casting machine on copper rod to set the melting temperature in advance. The system will automatically adjust the induction current and then heat and melt. When the copper liquid reaches the set temperature and runs stably, start the upward mechanism, the liquid copper cools and solidifies and is automatically drawn into a continuous copper rod. The cooling system of the upward continuous casting machine will monitor the temperature and finally form it.
About us:
Dalian Konform Technology co., ltd. was established in 1993 and has designed and manufactured more than 1,800 production lines for customers in 53 countries. It is widely used in the production of as wires, opgw, power cable aluminum sheaths, copper flat wires, copper busbars, copper strip blanks, aluminum tubes, aluminum conductors, etc.
